I can use the tap tempo, control Master Speed and Master Level, etc. The TouchOSC system can send commands to If you get yourself DisplayPad for your iPad and. Open the LiveControl template for TouchOSC (either LiveControl.touchosc or LiveControliPad.touchosc) in the TouchOSC editor. (mine was 10.0.1.3)ĭ) On the Ipad in the TouchOSC app, in the Connections section, I have the Enabled button ON, the Host is the pc IP address (mine is 10.0.1.2), Port (outgoing) is 8000, Port (incoming) is 9000.Į) In the TouchOSC Bridge section, I have the Enable button ON, Allow USB button OFF, Network Host blank.į) In the CoreMIDI section, I have the Enabled button on.Īt this point the Example Layout was populated with my Banks and Presets (I had to click on the Preset Manager button in DMXIS on the pc for the Banks and Presets to populate. Or you can connect to a computer with a PowerPoint slide show. Open DMXIS on the pc and TouchOSC on the iPad.Ĩ) Here are the settings I eventually figured out that I had to use:Ī) On DMXIS on the pc - open File/Preferences.Ĭ) Enter the Ipad IP address in the Transmit to IP Address field. connect the Ipad to the pc and sync in Itunes.ħ) Get the pc that you will be running DMXIS on at gigs, and the iPad with TouchOSC on the same network. This had me stumped for a while, but finally I found out that there seems to be a known bug loading to iPads. TouchOSC allows to configure five separate connections to connect to instances of the TouchOSC Bridge application. However, I got an error message of timing out. Put the file somewhere you will be able to find it in a few steps.Ĥ) Install the TouchOSC App on your ipad from the App Store.ĥ) At this point, you should be able to get the ipad and pc on the same network, click on the LAYOUT option and then ADD to get the new Example Layout you downloaded. Make sure you have one of the following: Mac with a USB port and OS X 10.9 or later. I used the JRE for windows 圆4 that is circled in red.ģ) Download the TouchOSC Example Layout here. Using a USB cable or adapter, you can directly connect iPad and a Mac or Windows PC. n-windows/Ģ) Install Java JDK or JRE from the above link. Sync TouchOSC Layout to your iPad using the TouchOSC Editor, it will display as 'CDJ1000' 3. So not sure if it is needed on that pc as well). I accidentally put it on the DMXIS pc first, which wasn't the same pc. (You'll at least need it on the pc that you use to sync your ipad in Itunes, not necessarily the pc you run DMXIS on for your shows. Some may have been unnecessary, but in the end it worked.ġ) Downloaded TouchOSC Editor on my pc. I pieced together tips from several sources, applied a little trial and error, and finally had success! ![]() ![]() I will post the steps in case anyone else is having trouble connecting their Ipad to DMXIS via TouchOSC. set BOTH parameters of "Range" to THE SAME VALUE to select the program you need AND PRESS ENTER AFTER ENTERING EACH VALUE!ħ.I figured this out and got it working. set "Channel" to what you need it to be (1 for me)Ħ. ![]() "Enabled" must be set to "Touch" and check the checkbox on the right of itĥ. in the left area with the parameters, select "MIDI"ģ. ![]() Save your interface as whatever name you want, select SYNC. Make sure that you leave the name of the toggle button as toggle1. Right click on the black empty interface window and select Toggle Button. TouchOSC layouts can be transferred to the device directly from the TouchOSC Editor running on a computer that is on the same WiFi network as the device. You need to do this to assign a custom program change to a button:Ģ. Once you have downloaded and installed the TouchOSC editor open it up. Can you give me some instruction to do it?Ĭould you please post a screenshot of your TouchOSC editor's parameter settings etc.?īy the way, the TouchOSC's editor (at least the Mac version) is a little strange sometimes. I've also tried to modify, in your template, number of programs via TouchOSC editor without success!! (I assigned midi progr. I've implemented your procedure using Windows and my IPAD PRO 11" and then, on my NS3, all work properly.
0 Comments
Leave a Reply. |